Johnson Controls IBPN-M-IS12-0, Быстрый старт, Страница: 2 / 2

Security
Mount installation (IBCR-M-ISWT-0)
1. Place the mounting template sticker on to the ceiling and cut out a
large hole as per the markings on the mounting template.
2. Attach one end of the safety lanyard to a secure structure or object
in the ceiling and screw in the eye bolt (1) (Figure 3) to the top of
the mount.
3. Attach the other end of the safety lanyard (2) (Figure 3) to the eye-
bolt on the mount.
4. Pull the
‘wings-tabs’ (3) (Figure 3) out to tighten the mount against
the ceiling.
Note:
You can rotate the screw (4) (Figure 3) to adjust the ‘wings-
tabs’ up or down.
Note:
There are three ‘wing-tabs’ on the mount.
5. Attach the other safety lanyard to
the ‘hook’ within the mount and
the ‘hook’ on the camera base.
6. See the Flex Gen 2 Multi-sensor Dome camera QSG at
https://illustracameras.com/cameras/ for instructions to securely
attach the camera to the wall mount.
Mount installation (IBCR-M-ISWT-0) continued
Figure 3
In the box (IBJB-M-ISWB-0)

1 x Junction bracket mount

2 x Mounting screws (these attach the camera to the mount)

4 x Screws and screw anchors

1 x Safety lanyard

1 x Quick Start Guide

1 x Mounting Template sticker
Installation tools (IBJB-M-ISWB-0)

Drill

Screwdriver
Mount Installation (IBJB-M-ISWB-0)
1. Place the mounting template sticker on to the mounting surface
and drill four screw holes, cut out a cable hole and then insert the
four screw anchors into the four screw holes.
2. Align the four holes on the junction bracket mount with the four
holes on the surface.
3. Insert the four screws into the four holes on the junction mount
bracket and securely attach the mount to the mounting surface.
4. Attach the safety lanyard to
the ‘hook’ on the mount cover (1)
(Figure 1) and the ‘hook’ on the camera base.
5. See the Flex Gen 2 Multi-sensor Dome camera QSG at
https://illustracameras.com/cameras/ for instructions to securely
attach the camera to the junction bracket.
Mount Installation (IBJB-M-ISWB-0) continued
Figure 4
© 2020 Johnson Controls. All rights reserved.
JOHNSON CONTROLS, TYCO and ILLUSTRA are trademarks and/or registered
trademarks. Unauthorized use is strictly prohibited.