Figure 6: Sample DIP switch settings
d. Set the ZONE DIP switches according to the job or system plans.
e. Set the MS/TP ADDRESS DIP switches to match the MS/TP address of the controller with
which the sensor is intended to communicate.
f. Set the TRANSMIT LEVEL switch to 10 mW.
For a One-to-One network application with an FX-WRZ7860 Receiver
(Figure 4), set the
DIP switches as indicated, ensuring that the AREA and TRANSMITTER ID switches on the FX-
WRZ7860 Receiver and the FX-WRZ Series Sensors are set to the same value.
a. Set the POWER switch to OFF.
b. Set the MODE switch to 1-to-1.
7
Temperature and Relative Humidity FX-WRZ Series Wireless Room Sensors Installation Instructions
