Figure 3: FEC1621 Physical Features
Table 1: FEC1621 Physical Features Callouts and Descriptions
Physical Feature: Description and References
Callout
Binary Output (BO) Source Power Selection Jumpers (see
Binary Output (BO) Source Power Selection Jumpers
)
1
Device Address DIP Switch Block (see
Figure 9
)
2
Mounting Clip
3
Configurable Output (CO) Terminal Blocks (see
Table 3
)
4
24 VAC, Class 2 Supply Power Terminal Block (see
Supply Power Terminal Block
)
5
Cover Lift Tab (One of Two) (see
Figure 3
)
6
Display Navigation Buttons (see
Setting Up an Integral or Local Display
)
Note:
Not available on all FEC models.
7
LCD Display Area (see
Setting Up an Integral or Local Display
)
Note:
Not available on all FEC models.
8
FC Bus Terminal Block (see
FC Bus Terminal Block
)
9
Sensor Actuator (SA) Bus Terminal Block (see
SA Bus Terminal Block
)
10
Sensor Port (Sensor Actuator [SA] Bus, RJ-12 6-pin Modular Jack) (see
Figure 6
)
11
Binary Inputs (BIs) Terminal Block (see
Table 3
)
12
Universal Inputs (UIs) Terminal Blocks (see
Table 3
)
13
LED Status Indicators (see
Table 8
)
14
Field Controller (FC) Bus Port (RJ-12 6-pin Modular Jack) (see
Figure 6
)
15
Binary Output (BO) Terminal Block (see
Table 3
)
16
5
FEC1611 and FEC1621 Field Equipment Controller Installation Instructions