4
DMPR-KS102 SD-1300 Actuator Mounting Bracket
Conversion Kit, External to Internal Left Side Mounting
Controls Group
www.johnsoncontrols.com
507 E. Michigan StreetP.O. Box 423Milwaukee, WI 53201
Printed in U.S.A.
Страница 1: ...ne or two blades 1 5 12 24 x 1 2 inch Self tapping Hex head Screw 4 6 10 32 x 1 1 4 inch long Hex head Screw 2 7 10 32 Hex Nut 2 Tools Required nut driver 1 2 and 7 16 inch open end wrench 1 2 and 7 16 inch 2 screwdriver Phillips head and flat blade center punch drill with 3 16 inch bits Procedures External Bracket Removal Figure 2 External Actuator Mounting Components CAUTION Shock Hazard Disconn...
Страница 2: ...ith the bracket 10 Use a drill with 3 16 inch bits to remove the nuggets securing the side plate to the damper frame Blade Arm Installation 1 Locate the drive blade which will be the first third or fifth blade from the bottom and using a 3 16 inch bit drill two holes for the blade arm item 2 3 or 4 in Figure 1 For best results Figure 3 Double Piece Blades Double piece blades drill out the second s...
Страница 3: ...d bolts Figure 8 Connecting Swivel Ball Joint 5 Insert the swivel ball joint into the second hole in the blade arm item 2 3 or 4 in Figure 1 as shown in Figure 8 Use two 7 16 inch open end wrenches to secure the swivel ball joint to the blade arm 6 Insert the linkage rod into the swivel ball joints and use a 7 16 inch open end wrench to verify that the swivel ball joints are securely connected to ...
Страница 4: ...PR KS102 SD 1300 Actuator Mounting Bracket Conversion Kit External to Internal Left Side Mounting Controls Group www johnsoncontrols com 507 E Michigan Street P O Box 423 Milwaukee WI 53201 Printed in U S A ...
