Buttons 1+2
Like
Button 4
but for the function per-
formed by the keyfob when simultaneously pressing the
away arming
and stay arming
buttons, for at least
2 seconds.
Default:
Not used
Timer
If this option is enabled, the Keyfob will be able
to perform its programmed functions ONLY during its
Timer slots (see
Timers
options group).
Partitions
Select the partitions that the control panel
arms when you press the away button
of the keyfob,
and disarms when you press the disarm button
of
the keyfob:
Ø
If this option is disabled, the keyfob CANNOT man-
age the partition.
Ø
If this option is ENABLED, the keyfob can manage
the partition.
Default:
ONLY partition n. 1 enabled.
Mode A
Use this option to set up the actions on the
partitions when you press the stay button
of the
keyfob:
Ø
Away Arm
: partition will arm in away mode.
Ø
Stay Arm
: partition will arm in stay mode.
Ø
Instant Stay:
partition will Arm in stay mode with
zero delay (instant).
Ø
Disarm
: partition will disarm:
Ø
No Action:
the partition does NOT change its state.
Default:
Stay arming of partition 1.
Mode B
Like
Mode A
but for the operations performed
on the partitions when you press the auxiliary button
Q
of the keyfob, or when you press simultaneously the
away arming
and stay arming
buttons, for at least
2 seconds: see
Button 4
and
Buttons 1+2
options.
Default:
Zero Delay Stay Arming of partition 1.
Arming Schedule
The
Arming Schedule
option group is to setup the au-
tomatic arming/disarming of the partitions at specific
times, as follow. To automatic arming/disarming a Parti-
tion on a specific day, you must:
Ø
enable a Time Table by checking the
Enabled
op-
tion;
Ø
setup the time when the Partition requires to be
Armed/Disarmed during the day, by clicking on the
Partitions
button of the Time Table;
Ø
Apply the Time Table to the required day by selecting
it on the Perpetual Calendar and by clicking on the
Apply
button;
Ø
click on the
Enable/Disable
button to enable the
Time Table on the selected day;
Ø
enable Auto-Arming (by the
Enable Auto Arming
option in the
General System Options
or by the
Auto-Arm
option on the Keypad Mater User Menu).
e
In order to comply with the EN50131-1 and
EN50131-3 standards, if a zone is in alarm during
auto-arming, at default, the Panel inhibits the arm-
ing, without triggers alarms, and logs in memory the
events and their causes. In addition, the Panel noti-
fies the arming fail by the Voice Dialler:
Automatic
Arming Refused on Partition
event enabled.
n
Time Table
You can setup up to 20 Time Tables, as follow.
#
This is the Time Table ID. Any Time Table is identi-
fied by its ID number (#) and a specific colour. The ID
number and colour are used to identify the Time Table
on the Perpetual Calendar.
Title
You can assign a significant name to the Time Table.
Type
You can setup Daily and Weekly Time Tables.
Ø
Daily
: Daily Time Table applies to the selected days
on the Perpetual Calendar, independently by the day
of the week.
Ø
Weekly
: Weekly Time Table applying to the selected
days on the Perpetual Calendar depending on the
day of the week.
+
To setup the Weekly Type you need seven Time
Tables, one for each day of the week, therefore the
application asks you the confirmation for override
the six Time Tables following the one selected.
Edit
By Clicking on the
Partition
button you can setup
the relevant Time Table by means the
Partition Event
Editor
, as described in the relevant paragraph.
+
The Partition button is active only if the
Enabled
box is checked.
Week Day
This column shows the week of day that the
Weekly Time Table refers to:
MON
(Monday);
TUE
(Tuesday);
WED
(Wednesday);
THU
(Thursday);
FRI
(Friday);
SAT
(Saturday);
SUN
(Sunday).
ABSOLUTA Plus
PROGRAMMING FROM THE PC
87
Содержание Bentel Security tyco ABS128M50
Страница 14: ...14 Expandable Hybrid Control Panel...
Страница 98: ...98 Expandable Hybrid Control Panel...
