Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 68 / 132

Tlephone Enabled If disabled the event does NOT
play voice messages by telephone. If ENABLED the
event PLAYS voice messages for selected numbers
(see
Vocal Numbers ).
Default: see Table 10.
R
estore If disabled the event does NOT play voice
messages by telephone when it ends. If ENABLED (de-
fault), when the event ends the selected Voice Mes-
sages are PLAYED.
Call All If this option is ENABLED (default), the Control
Panel will call ALL the phone numbers for the event
(see
Vocal Numbers ).
If this option is disabled, the Control Panel will call the
phone numbers for the event (see
Vocal Numbers ) un-
til a call ends successfully: the other event’s numbers
will NOT be called.
Vocal Numbers
11
If disabled, the event does NOT
play the Voice Message for the corresponding Tele-
phone Number. If ENABLED (default), the event
PLAYS the Voice Message for the corresponding Tele-
phone Number (see the
Phonebook options group).
+
The Control Panel will call either ALL programmed
Phone numbers or the programmed Phone num-
bers until one call is successful, depending on the
options
Call All .
n
SMS
+
The communicator is disabled as long as there is a
PIN to default fault, i.e., no communication action
is performed even if programmed (see “EN50136”
in “System Options > EN50131/EN50136”).
This sub-group of options involves settings for SMS
messages that must be sent by the events.
3
In order to comply with EN50131 Grade 3 stan-
dards, SMS Messages may NOT be used for alarm
notifications.
+
To use this function the ABS-GSM GSM Module
must be installed and programmed as outlined in
the “GSM” section.
SMS Enabled
12
If disabled (default), the event does
NOT send SMS.
If ENABLED, the event sends an SMS messages to the
numbers selected in the option
Vocal Numbers . When
the event OCCURS, the SMS message consists of the
following parts (See the
SMS Messages option group):
Ø
SMS n. 1 (Panel Header);
Ø
SMS n. 2 (Alarm) for alarms or
SMS n. 3 (Tamper) for tampers or
SMS n. 4 (Fault) for troubles or
SMS n. 8 (Generic) for other events;
Ø
the SMS message selected in the option SMS Text ;
Ø
time and date of the event
13
.
Restore via SMS
8
If ENABLED when the event ENDS,
the control panel send a SMS message, it consists of the fol-
lowing parts (see the
SMS Messages option group):
Ø
SMS n. 1 (Panel Header);
Ø
SMS n. 5 (Restoral Alarm) for alarms or
SMS n. 6 (Restoral Tamper) for tampers or
SMS n. 7 (Restoral Fault) for troubles or
SMS n. 8 (Restoral Generic) for other events;
Ø
the SMS message selected in the option SMS Text ;
Ø
time and date of the event
9
.
SMS if Voice Call Failed
8
If ENABLED, the event
sends the SMS to the programmed numbers (see SMS
> Vocal Numbers ) ONLY if the voice calls fail.
Default: disabled.
SMS Text
8
Select the SMS message that the event
should send (see the SMS Messages option group).
Default: none.
68 Expandable Hybrid Control Panel
11 This column ONLY shows the Voice Dialler telephone numbers that are NOT empty i.e. are made up of at least one
digit (see Number and Type in the Phonebook options group). This column is NOT displayed if there is no
telephone number with these characteristics.
12 Events that belong to the events group in the Smart Actions options group, which have the All option ENABLED,
have the SMS Enabled and Restore via SMS options ENABLED and locked (cannot be changed), the SMS if
Voice Call Failed option disabled and locked, and the SMS Text option empty and locked (see “Smart Actions” for
further information).
13 The time and date of the event are displayed in the format (<hh:mm:ss><space><dd/mm/yy>) , where hh = hour,
mm = minutes, ss = seconds, dd = day, mm = month, yy = year; the date format can be changed (see “Date/Time
(2.4)” in the USER MANUAL).