Johnson Controls Bentel Security tyco ABS128M50, Руководство по установке

Страница: 55 / 132

Phonebook
The Phonebook option group is a list of telephone numbers
that may be used by the Control Panel to carry out voice or
digital calls, on the PSTN channel or GSM channel.
+
The Telephone Numbers used for Arming/Dis-
arming the Partitions via SMS must be present in
the Phonebook, otherwise the Control Panel re-
jects the call.
Label This option is to enter a significant label for the
number.Phone Number.
Enabled You can enable/disable the communication
on the Telephone Number. You may need to disable the
Telephone Number without cancel all its settings, to
re-enable it after a certain period.
White list If the Black List option is ENABLED (see
GSM options group), the control panel ONLY answers
calls coming from telephone numbers with the White
List option enabled.
Default: disabled.
+
This option ONLY affects calls received on the
GSM channel. The control panel always answers
calls received on the PSTN channel.
Caller ID over GSM If ENABLED, the telephone num-
ber can activate the respective Caller ID over GSM
event (see “Events and Actions > Caller ID over GSM
events”).
Default: disabled.
+
The event is activated at “zero cost” as once the
caller is recognised, the Control Panel activates
the event without answering the call.
+
The Control Panel will reject calls from Telephone
Numbers that have this option ENABLED.
Number This option is to enter the phone number that
will be called: you can enter up to 16 characters.
Valid entries: digits from 0 to 9, digit - (dash) for a 4
seconds pause , and digit _ (underscore) for 2 sec-
onds pause .
The 2 seconds pause can be inserted, for example, be-
tween a switchboard number and a telephone number.
+
DO NOT insert breaks in the numbers called via GSM.
+
The Telephone Number may be entered with or with-
out the international prefix, as required; the interna-
tional prefix must be entered using the 00xx format;
the application does NOT accept the +xx format.
Type This option is to set up the phone number for
Voice Dialler or Digital Dialler:
Ø
the Voice Dialler will send a Voice Message to the
relevant Phone Number;
Ø
the Digital Dialler will send digital information to the
relevant Phone Number.
3
In order to comply with EN50131 Grade 3 standards,
ONLY use the
ABS-IP IP Module to report alarms: the
integrated PTSN communicator CANNOT be used.
Digital Protocol This option will allow you to set up the
Reporting format used by the Control Panel to send dig-
ital information to the Phone number.
This Control Panel supports
Contact ID and SIA Re-
porting formats.
Once the digital transmission has been completed, the
Control Panel, if the relative option is enabled (see
Au-
dio Session options), will open an audio channel that
let to the Central Station operator to verify the alarm
communication.
The system users will be able to communicate with the
Central Station operator via the
AS100 Audio Station.
The voice channel will remain open until the Central
Station operator ends the session.
+
The Central Station must be able to manage audio
communications.
Account # Enter the Customer Code to identify the
system that transmits events to PSTN receivers: ask
the Central Station.
Valid entries: see Table 9
Default: 0000.
n
Audio Session
Disabled This option is to disable the phone number
for the remote actions from telephone.
Two Way Call If you enable this option the Control
Panel opens a two way audio session once the transmis-
sion has been completed. In this way the Central Station
operator will be able to speak with the person that need
help, by means the
AS100 ‘s microphone and speaker.
+
Adjust the Speaker Volume and Microphone Vol-
ume on the GSM module (see the GSM option
group) to resolve any problems starting the
two-way communication session via the GSM.
Audio Verification If this option is enabled, the Con-
trol Panel opens an Audio channel, once the transmis-
sion has been completed. In this way the Central Sta-
tion operator will be able to verify the event by means
the
AS100 ‘s microphone.
REPORTING FORMATS TYPE
ACCOUNT CODE
digits (valid entries)
REPORTING CODE
digits (valid entries)
NOTES
CONTACT ID DTMF 4 (0 ÷ F) Refer to Event and Actions 0 = A
SIA LAN 4 (0 ÷ 9) Refer to Event and Actions
Table 9 Digital Communicator Reporting Formats