Installing the GSM Module
!
Before installing the GSM Module, make sure
that the control panel is not connected to the
power supply.
!
Before inserting or removing the SIM card,
make sure that the GSM Module is not con-
nected to the power supply.
+
Disable the PIN and call forwarding on the SIM
card before inserting it in the GSM Module.
The
ABS-GSM
Module can be installed in the ABS-M
metal box and the ABS-P plastic box as shown in Figure
2 on page 16 and in Figure 3 on page 17 (part n.
25b
)
respectively and described below (see Figure 6).
1.
Insert the SIM card in SIM holder
102
of the Mod-
ule.
2.
Insert
the
GSM
Module
on
connector
8
(
GSM/GPRS
), while being careful to make the
holes on corner guards
101
coincide with the holes
7
on the Motherboard.
!
Inserting the GSM Module incorrectly may lead
to serious damage.
3.
Attach the GSM Module to the holes
7
using the
screws provided.
Metal Box
Installation in the ABS-M metal box re-
quires antenna
BGSM-100CA
(b).
4.
Place antenna
BGSM-100CA
on the top of the
metal box as far away from the wall as possible.
5.
Thread the antenna’s wire through hole
43
on the
bottom of the control panel and then connect it to
connector
93
of the GSM Module.
6.
Fix the antenna wire to anchor
45
.
Plastic Box
Installation inside plastic box ABS-P re-
quires the
ABS-AK
antenna (c).
7.
Remove bolt
95
and washer
96
from connector
97
of wire
98
provided with the ABS-AK antenna.
8.
Insert connector
97
in hole
39
of the ABS-P box.
9.
Insert washer
96
and screw in bolt
95
until connec-
tor
97
is blocked.
10.
Screw antenna
94
onto connector
97
.
11.
Screw connector
99
onto the Module’s connector
93
.
Check that the GSM signal is strong enough at the loca-
tion chosen for the control panel’s installation (see
Sta-
tus
page); if it is NOT strong enough, try to move the
antenna on the metal box or the control panel or try with
the
ANT-EU
external antenna.
Program the options for the GSM Module:
GSM
and
SMS Message
option groups.
22
Expandable Hybrid Control Panel
Figure 6
Parts of the
ABS-GSM
Module (a), of the
BGSM-100CA
antenna for metal box (b), and of the
ABS-AK
an-
tenna for plastic box (c).
Содержание Bentel Security tyco ABS128M50
Страница 14: ...14 Expandable Hybrid Control Panel...
Страница 98: ...98 Expandable Hybrid Control Panel...
