Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 21 / 64

Small Battery Drive II User Manual DePuy Synthes 19
All Small Battery Drive II Ream Attachments
provide an approximative maximal torque of 7.5 Nm
(with battery 532.103).
Quick Couplings for Medullary Reaming
AO/ASIF Quick Coupling (532.017)
Hudson Quick Coupling (532.018)
Trinkle Quick Coupling (532.019)
Trinkle Quick Coupling, modified (532.020)
The Quick Couplings for Medullary Reaming enable
the use of flexible shafts with the appropriate
coupling geometry. Reverse motion, which can
damage the flexible shafts, is prevented by a
special mechanical system.
Inserting cutting tools into the coupling
Maneuver the unlocking ring on the attachment
backward and insert the tool (such as a drill bit) while
rotating it slightly until it locks into place. Release the
ring. Check if the tool is seated correctly in the coupling
by gently pulling on it.
Removing cutting tools
Push the unlocking ring on the attachment backward
and remove the tool.
Quick Coupling for DHS/DCS Triple Reamers
(532.015)
For DHS/DCS Triple Reamers; can also be used
to open the medullary cavity with most of the
Depuy Synthes nailing systems.
Mounting and removing the tools
To connect the tool, push the coupling sleeve forward
and then introduce the tool while turning slightly. To
disconnect, push the coupling sleeve of the attachment
forward and remove the tool.
Attachments
Ream Attachments