Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 19 / 64

Small Battery Drive II User Manual DePuy Synthes 17
AO/ASIF Quick Coupling (05.001.250)
For tools with an AO/ASIF coupling shaft.
Mounting and removing the tools
Insert the tool into the attachment from the
front applying slight pressure and turning slightly.
It is not necessary to operate the coupling sleeve
of the attachment.
To disconnect, push the coupling sleeve of the
attachment back and remove the tool.
Chucks
There are two Drill Attachments Chucks available as Drill Attachments for the Small Battery Drive II system.
Article number Clamping range Spare key Comments
05.001.252 0.5–4.0 mm 310.93K For drilling
05.001.253 0.5–7.3 mm 510.191 For drilling
Attachments
Drill Attachments
Inserting cutting tools
Open the jaws of the Chuck using the appropriate key or
by hand. Insert the shaft of the tool into the open drill
chuck and close it by twisting the chuck. Make sure that
the shaft lies central to the three jaws. Tighten the drill
chuck with the key. Make sure that the teeth of the key
engage correctly in the toothed rim of the chuck.
Removing cutting tools
Open the Chuck with the key and remove the tool.
Warnings:
•
To ensure secure fixation of the instrument, make
sure the toothed rims on the drill chuck and key
are not worn. Replace damaged or worn
components. Only use original Depuy Synthes key.
•
Do not use the Small Battery Drive II for
acetabular reaming.