Johnson Amplification Integrated Modeling Amplifier Скачать руководство пользователя | Manualshive

Страница: 43 / 116

background image

Effects Library

The following pages offer a complete description of all of the effects available in the Johnson Millennium Stereo 250.

Analog Wah

With the Analog Wah, you get the best of both worlds. This Analog Wah is digitally controlled. This means that you get an dead-on accurate
Wah emulation, which is controlled via the Millennium's powerful processing. And the best thing is, you no longer have to change batteries
every 3 to 4 hours.

The Analog Wah module also gives you the ability to assign a Dynamic Modifier to the Pedal parameter to create Auto-Wah effects within the
Wah module.

Analog Wah Parameters

On/Bypass

This parameter turns the Analog Wah On or Bypasses the effect module.

Wah Position

Controls the pedal position of the Analog Wah effect module. Ranges from 1 to 128.

*An Expression pedal such as

the expression pedals on the J-12 or a standard volume or voltage control pedal must be assigned to this
parameter in order for module to operate.

Wah Type

Selects which Wah type is to be used. Selections are: Toe heavy, Linear, and Heel Heavy.

Amplifier Types

All of the great Amplifier tones of today and the past are present under the hood of the Johnson Amplification Millennium. You can access any
of these tones by pressing any one of five Amplifier Modeling buttons located on the front panel. Successive presses of each button will move
you through a variation of the selected Amplifier Model type. They’re all there, but if you want to modify these tones, this can easily be done
in the Edit mode or on the fly with the tone controls on the front panel.

Amplifier Type Parameters

Amp Selector

This parameter is used to select the different Amplifier types available.

Channel Selector

Selects which channel of the Amplifier is being used or modified. Selections are channel A or channel B.

Channel A Gain

This parameter controls the amount of gain used in channel A. Range is from 0.0 to 10.

Channel A level

This parameter controls the overall level of channel A. Range is from Off to 100%.

Channel B Gain

This parameter controls the amount of gain used in channel B. Range is from 0.0 to 10.

Channel B level

This parameter controls the overall level of channel B. Range is from Off to 100%.

Johnson Millennium

User Guide

Section - 4 Editing Modules

35

«
...
41
42
43
44
45
...
»

Содержание Integrated Modeling Amplifier





















































































































Отзывы:

Нет отзывов

Похожие инструкции для Integrated Modeling Amplifier

Бренд: AAVIK Страницы: 8

Бренд: Samson Страницы: 2

Бренд: YORKVILLE Страницы: 12

Бренд: YORKVILLE Страницы: 8

Sonic Frontiers Power 1

Бренд: Sonic Frontiers Страницы: 17

Бренд: AR Страницы: 62

Бренд: Sansui Страницы: 24

Бренд: Yerasov Страницы: 8

Бренд: STK Professional Audio Страницы: 32

Бренд: ifi Страницы: 14

Бренд: Bang & Olufsen Страницы: 12

Бренд: MTX Страницы: 6

Бренд: Spectral Products Страницы: 25

Бренд: Majorcom: Страницы: 8

Бренд: Soundavo Страницы: 12

Бренд: Optimus Страницы: 23

Audio Buddy Dual Mic Preamp

Бренд: M-Audio Страницы: 8

Бренд: Black Rooster Audio Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды