Johnny Vac SILENZIO, Руководство пользователя

Страница: 6 / 12

SILENZIO
- 6 -
User Guide
USE AND FUNCTION
IMPORTANT:
This motor is equipped with a motor protective thermostat. If for some reason the vacuum
cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur
unplug the vacuum cleaner from the wall outlet and turn off switch, change dust bag and clean
filters. Allow the unit to cool for approximately 1 hour. To restart, replug into wall outlet and turn
switch back on.
CHANGE DUST BAG
1. Open the front cover.
2. Change dust bag.
3.
Be carefult not to throw away the bag holder at the same time, it will be needed when
installing the new bag.
1 2 3
CARRY AND MOVE AWAY THE CLEANER
NOTE:
This cleaner have a special feature for handle. The carry-handle is in front. You can use it to
conveniently carry the cleaner in a vertical position.
Assembling vacuum cleaner
NOTE
:
Always remove the power plug from the wall outlet before assembling or removing accesso-
ries.
1. Attaching the Flexible Hose into the vacuum: connect the flexible hose into the air intake duct,
push in until you hear a “click”, indicating it is in its locked position.
2. Fitting the tube to the curved wand/hose extension: push the tube into the curved wand/hose
extension.
3. Fitting the Floor Brush to the tube: push the tube into the floor brush. Adjust the tube to the
desired length.
VARIABLE SUCTION CONTROL
NOTE
:
Once all attachments are in place, unwind a sufficient length of cable and insert the plug into
the wall outlet. A yellow mark on the power cord shows the MAXIMUM cable length. Do not pull
the power cord beyond the red mark.
1. Insert the power plug into the wall
outlet.
2. Press the power on/off button located
the unit to turn the vacuum cleaner
“ON”.
3. To rewind the power cord, press the
cord rewind button with one hand and
guide the power cord with the other
hand to ensure that it does not whip
causing damage or injury.
4. To adjust the suction, turning the
On/off button on the suction hand to
control the suction power of the
vacuum cleaner.
ON / OFF
BUTTON
REWIND
BUTTON
SPEED CONTROL BUTTON
REMOVING & CLEANING PRE-MOTOR FILTER
AND AIR OUTLET FILTER
WARNING:
Always unplug the unit from electrical outlet before getting out the dust barrel.
A. Pre-motor filter
1. Open the front cover.
2. Clean or change filter.
1 2
B. HEPA filter
1. Open the front cover.
2. Take out the air outlet filter to clean or change.
1 2
PLEASE NOTE:
The sponge filter material in the cleaner will became dusty over time. This is normal and will not
affect the performance of the filter. If the sponge filter is so dusty that suction does not return to
100%, then we suggest that the motor filter be removed then and rinsed under the faucet and
allowed to dry for 24 hours by airing not near the fire or some high temperature objects before
refitting into the vacuum. This should be done once every six months or when suction appears to
be reduced.
It is recommended to change the HEPA filter once a year or as soon as it is damaged.
IMPORTANT:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will
overheat and could become damaged.