© John GmbH
page 12/20
15.2
Belt height
1)
Open sun canopy and back
Open the sun canopy completely (see chapter
Folding JOSI-Wismi).
Open both zippers to release the sun canopy
from the back and to open the back.
2)
Remove the belt adjuster
Loosen the hexagon socket screw at the belt
adjuster at the back.
Pull the belt completely out of the belt adjuster
to remove it.
Required tools:
Hexagon socket wrench 8 mm
Allen key 3 mm
3)
Unhook the belt connector
Open the backrest to get to the belt connector.
Unhook the straps at the strap connector and
guide them in front direction through the
backrest.
4)
Guiding the belt
Turn the belt back through the fitting opening.
Please note:
If the slots don´t exist yet they need to be cut out
by a sharp knife.
Attention!
Only cut at the designated points to avoid
tearing.
5)
Inserting the belt
Insert the belt again into the belt connector and
check for correct seating.
6)
Reassemble backrest & sun canopy
Close zipper of the back covering up to the
middle.
Mount the belt adjuster at the back (put the
screw through the frame and fabric) and
guide the strap back through the belt
adjuster.
Guide the strap back through the belt
adjuster.
Close back cover completely.
Close sun canopy completely with zipper.