John Shearer Pasture Renovation Drill, Руководство оператора

Страница: 26 / 59

02.19M143J1
18
Step 3) Press “Pause” of “Finish” to stop seeding. If you press pause, you
can re-start from where you left off.
Note1)
If the incorrect sprocket ratio has been selected for the product, or you are
driving too fast (or too slow – for a low speed warning), you may see a
warning like this below:
This means that the limits of the motor/s have been exceeded. The
solutions could be to either drive slower (or faster for a low speed warning)
or to calibrate with a more acceptable sprocket ratio for the selected rate.
The chart on the following page will guide you to an appropriate sprocket
ratio.
If seeding continues with this warning, the rate accuracy will be affected.
Note 2)
On machines with bin level sensors, “empty” will show up when a bin is
very low or empty. This means it is time to stop and top up the bin.
High
speed
warning
Bin 1
settings and
Finish and
Pause
buttons Hectares
travelled
Bin 2
settings and Current
Speed
“On-the-go” Seed
rate adjustment (Up,
Down & Pause)
buttons. Rate can be
adjusted in 1 kg/ha
increments.