Step Five
On each of the bed slats (
H
) put the slat holder (
I
) and then fit the slat into the predrilled holes on
the bedframe, as shown in the diagram. Repeat this step with the other 40 slats. Please fit the
side supports (
09
) in the middle of each side of the bed.
Step Six
All fittings (
B
) must be screwed into pre drilled cams of drawer fronts (
06
).
Screw the wheels (
D
) with the wood screws (
C
) in the marked places on the bottom of
the drawer (
07
). Please attach drawer fronts (
06
) to drawers as shown per picture. If
cams don’t lock into place please use the screw driver to adjust them.
Содержание St. Ives 80343003
Страница 3: ......
