Step by step assembly instructions
Step One
Attach the Under Base (4) to the Headboard (1) and Footboard (2) using Rect. Connector (E) and
JCBC Screw M8 x 75 mm (A) and hand-tighten to loosely secure parts together. Do not tighten
with Allen Key (H) until you have put all parts together.
A
H
E
A
A
A
A
E
E
4
3
E
A
A
A
E
A
E
2
1
Step Two
Attach the Back Guardrail (6) to the Upper Base (3) using JCBC Screw M6 x 15 mm (D), then to the
Headboard (1) and Footboard (2) using Washer (F) on the inside of the headboard (as shown) and
JCBC Screw M6 x 55 mm (C). Again, hand-tighten parts together. Repeat for the Front Guardrail (5).
3/5
C
C
1
6
C
C
2
C
C
D
D
5
D
D
C
C
F
F
LOOSELY SECURE PARTS
TOGETHER IN EACH STEP
SO ALL PARTS FIT
TOGETHER SMOOTHLY UNTIL
TIGHTENING AT THE END
PLEASE NOTE THE
WASHERS (F) SHOULD
BE PLACED ON THE
INSIDE OF THE
HEADBOARD (1) AS
SHOWN ABOVE
