6/10
Step Five
Step Six
Insert the Front Legs (7)x2 into the pre-drilled holes on the underside of the Headboard (1) and twist to secure, as
shown in the diagram below.
Legs x 2
I.
7.
M8 Nut x 2
M13 Spanner x 1
Screw
3.5 x 30mm x 2
M6 X 25mm Bolt x 4
7
Legs x 2
16.
Metal plates x 2
M8 Spring
Washer x 2
A.
M4 Allen Key x 1
F
or H
ea
d
bo
ar
d
O
nl
y
3
1
L.
M.
N.
Attach the Metal Plate (16) to the bottom of the Footboard (2) using Bolts M6 X 25mm (I) x2. Do not tighten the bolts
until you make adjustment for the screw hole at the Side Rail (3). Insert Wooden Leg (7) into the bottom of the
Metal Plate (16) using M8 Spring Washer (G) and M8 Nut (M). Hold the M8 Nut (M) using M13 Spanner (N) and twist
the Wooden Leg (7) to secure in place. Repeat for other leg.
G.
7.
x2
For Footboard Only
M6 x 25mm (I)
1
16
M4 (A)
M6 x 25mm (I)
M6 x 25mm (I)
1
M4 (A)
M6 x 25mm (I)
16
3.5 x 30mm (L)
3.5 x 30mm (L)
M13 Spanner (N)
M8 Nut (M)
M8 Spring
Washer (G)
16
7
1
STEP 1
STEP 2
AFTER INSERTING BOLT M6 x 25MM,
MAKE ADJUSTMENT FOR SCREW HOLE,
THEN INSERT THE SCREW 3.5 X 30MM.
TIGHTEN THE BOLT M6 x 25MM
FIXINGS FULLY.
TWIST WOODEN LEG ONLY
WITHOUT MOVING THE M8 NUT,
SPRING WASHER AND SPANNER
Twist the wooden leg
3
3
3
Yellow sticker
face down
