C
D
4
Starting at the headend, insert the Centre Caps (C) along the Centre Rail (5). Ensuring that the Slats (4) are
facing curved side up, insert into the Centre Caps (C). Place a Side Cap (D) onto the other end of the
Slats (4) and push down fully into the pre-drilled holes along the Side Rails (3), as shown in the diagram below.
Repeat this process to attach all 30 Slats (4).
Step Six
Side Caps (30 pcs)
Centre Caps (15 pcs)
Slats (30pcs)
4.
C.
D.
5/6
Step Five
This bed is now ready to use.
