Step Ten
7/8
Attach Drawer Panel (13) to drawer and tighten together using M6 x 40mm Bolt (H). Tighten with
M4 Allen Key (A).
Slide drawers into both sides of the bed frame. The bed is now ready for use.
M6 x 40mm
x 8
M4 Allen Key x 1
A.
H.
13
x2
13
Step Nine
3.5 x 30mm(40)
Cross Head
Screw Driver
J.
To construct the drawers, fix Drawer Back (10) with one end of each Drawer Support (14) using
Screws 3.5 x 30mm (J) as shown in Fig.1, then fix the Drawer Sides (9) to the Drawer Back (10). Next,
insert Drawer Bottom (12) and then fix Drawer Front (11) using Screws 3.5 x 30mm (J) as shown in Fig.2.
Finally, secure the other end of the Drawer Supports (14) to the other side of the drawer and tighten using
a cross head screw driver.
(x2)
(x2)
10
10
9
11
12
14
9
(x2)
9
9
14
14
14
Fig. 1
Fig. 2
Fig. 3
