Legs x 4
7.
Step by step assembly instructions
E.
F.
I.
Step One
Step Two
3/6
To attach the Side Rail (3) with the Headboard (1), start with inserting the Two-Ways Bolt (I) into the pre-drilled holes
on the Siderail (3) as shown in Fig. 1.
Next, you can start to attach the Side Rail (3) and the Headboard (1) with M8 Washer (E) and M8 Nut (F) by opening
the zip at the back of the Headboard (1) as shown in Fig 2.
Do not tighten with M13 Spanner (B) until you have inserted the Centre Rail in the next step.
STEP 2
1
3
Two-Ways Bolt
x 4
M8 Washer x 4
M8 Nut x 4
Two-Ways Bolt (I)
3
Short
Long
Fig.1
STEP 1
PLEASE SCREW
A SHORT HEAD
OF THE BOLT TO THE SIDE RAILS
IN ORDER TO ATTACH THE SIDE
RAILS WITH THE HEADBOARD
1
*Open the zip
Fig.2
3
3
Insert the Legs (7) into the pre-drilled holes on the Siderail (3). Twist the legs (7) to secure in place.
(As per diagram below)
3
3
7
7
7
7
3
M8 Washer (E)
M8 Nut (F)
STEP 3
x4
