background image

Care guide

Care and maintenance

How to care for your wood furniture

Furniture with a hard lacquer should be dusted with a dry cloth.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building up
over time.

Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and
ensure that a mat or pad is placed under paper if you are writing.

Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by
central heating can cause damage such as warping

Use glass cleaner or soapy water for cleaning, do not use anything abrasive as this may damage the surface of
the product.
Protect surfaces from scratches and marks by using mats and coasters.

Safety instructions

Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.

Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.  No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

If the glass is chipped or broken stop using the product and consult the manufacturer or supplier.

WARNING:

a) Do not place very hot or very cold items directly on glass surfaces.
b) Do not sit or stand on glass surfaces.
c) Do not strike the glass with hard or pointed items, or use the glass as a chopping surface.
d) Do not use washing powders or any other substances containing abrasives, as these may scratch the glass.

Handle with care! A damaged edge or scratched surface can in rare cases cause the glass to fail unexpectedly
into many small pieces. Glass is most vulnerable when struck from the side.

Retain these instructions for future reference.

John Lewis Partnership
171 Victoria Street
London SW1E 5NN

johnlewis.com

Wood Furniture

Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary ray’
which can appear on 

ash

 furniture is a mark of good quality timber - these are just characteristics of the natural

beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on flat surfaces, such as table tops and drawer fronts
by the way the slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items
that have been previously purchased.

Содержание Mantis Desk 816 28704











Отзывы: