John Lewis JLWM1417, Руководство пользователя

Страница: 27 / 44

Opening the door - Adding
garments
If the temperature and level of the
water in the drum are too high
and/or the drum is still rotating
you cannot open the door.
While a programme or the delay start operates,
the appliance door is locked.
1. Touch the button Start/Pause.
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary, add or
remove the items.
3. Close the door and touch the Start/Pause
button.
The programme or the delay start continues.
End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The display
shows
The indicator of the Start/Pause button goes
off.
The door unlocks and the indicator goes
off.
1. Press the On/Off button to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance
again, the display shows the end of
the previous programme. Turn the
programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent dispenser
slightly ajar to prevent mildew and odours.
5. Close the water tap.
Draining water out after end
of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, the programme is completed, but:
• The time area shows and the display
shows the door locked .
• The drum still turns at regular intervals to
prevent creases in the laundry.
• The door stays locked.
• You must drain the water to open the door:
1. If necessary, touch the Spin button to decrease
the spin speed proposed by the appliance.
2. Press the Start/Pause button:
• If you have set Rinse hold the appliance
drains the water and spins.
• If you have set Night the appliance only
drains the water
The option indicator Rinse hold disappears.
3. When the programme is completed and the
door locked indicator goes off, you can
open the door.
4. Press the On/Off button for a few seconds to
deactivate the appliance.
Stand-by option
The Stand-by function automatically deactivates
the appliance to reduce the energy consumption
when:
• You do not use the appliance for 5 minutes .
Press the button On/Off to activate the
appliance again.
• After 5 minutes from the end of the washing
programme
Press the On/Off button to activate the
appliance again.
The display shows the end of the last set
programme.
Turn the programme dial to set a new cycle.
If the dial is rotated to the "Reset" position ,
the appliance automatically turns off in 30
seconds.
Washing Machine User Manual 27