John Lewis JLWD 1612, Руководство пользователя

Страница: 29 / 48

Timed drying
1. Press button Dryness level repeatedly to set
the time value (see the «Drying Programme»
table).
The drying symbol comes on.
The anti-crease symbol comes on.
The drying time symbol comes on.
Set time value.
Each time you press this button the time value
increases by 5 minutes. The display shows the
set time value.
After some seconds the set time value on the
display changes: the appliance calculates also the
duration of the anti-crease and the cooling
phases.
Final time value.
2. Press Start/Pause to start the programme. The
text bar tells that the appliance is drying. The
display shows the new time value every
minute.
The drying symbol starts to flash.
The door locked symbol comes on.
If you set the time value of only 10
minutes, the appliance performs
only a cooling phase.
At the end of the drying
programme
1. The appliance stops automatically.
2. The acoustic signals operate (if they are
active).
3. In the display comes on.
4. The indicator of button Start/Pause goes off.
5. The last minutes of the drying cycle the
appliance performs the anti-crease phase.
The anti-crease symbol flashes. The door
is still locked (the symbol is on).
6. Press button On/Off for some seconds to
deactivate the appliance.
After some minutes from the
end of the programme, the
energy saving function
automatically deactivates the
appliance.
7. When the door locked light goes off you
can open the door.
8. Remove the laundry from the appliance. Make
sure that the drum is empty.
9. Keep the door ajar, to prevent mildew and
odours.
10. Close the water tap.
Washer Dryer User Manual 29