![John Lewis JLFFS1820 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/john-lewis/jlffs1820/jlffs1820_user-manual_2021744016.webp)
Problem
Possible cause
Solution
The compressor does not start im-
mediately after pressing FastFreeze,
or after the change of the tempera-
ture.
This is normal, no error has oc-
curred.
The compressor starts after some
time.
Water flows inside the refrigerator. The water outlet is clogged.
Clean the water outlet.
Water flows inside the refrigerator. Food products prevent water
from flowing into the water col-
lector.
Make sure that food products do not
touch the rear plate.
Water flows on the floor.
The melting water outlet is not
connected to the evaporative
tray above the compressor.
Attach the melting water outlet to the
evaporative tray.
Temperature cannot be set.
The FastFreeze function is
switched on.
Switch off FastFreeze function manual-
ly, or wait until the function resets au-
tomatically to set the temperature.
Refer to "FastFreeze function".
The temperature in the appliance is
too low/too high.
The temperature regulator is not
set correctly.
Set a higher/lower temperature.
The temperature in the appliance is
too low/too high.
The door is not closed correctly. Refer to "Closing the door".
The temperature in the appliance is
too low/too high.
The food products temperature
is too high.
Let the food products temperature
decrease to room temperature be-
fore storage.
The temperature in the appliance is
too low/too high.
Many food products were inser-
ted at the same time.
Insert less food products at the same
time.
The temperature in the appliance is
too low/too high.
The door has been opened too
often.
Open the door only if necessary.
The temperature in the appliance is
too low/too high.
The FastFreeze function is
switched on.
Refer to "FastFreeze function".
The temperature in the appliance is
too low/too high.
There is no cold air circulation in
the appliance.
Make sure that there is cold air circu-
lation in the appliance.
Side panels of the appliance are
warm.
This is a normal state caused by
operation of the heat exchanger.
Make sure that there is at least 30 mm
of space between each side of the ap-
pliance and the surrounding furniture
when the ambient temperature ex-
ceeds 38°C.
Fridge Freezer User Manual
16