John Lewis JLDWS1229 Скачать руководство пользователя

Страница: 14 / 36

Options

Desired options must be activated

every time before you start a

programme. It is not possible to

activate or deactivate options while

a programme is running.

Not all options are compatible with

each other. If you have selected

non compatible options, the

appliance will automatically

deactivate one or more of them.

Only the indicators of the options

still active will stay on.

Multi tab

Activate this option when you use multi-tablets

that integrate the salt, rinse aid and detergent

functions. They can also contain other cleaning

or rinsing agents.
This option deactivates the release of salt. The

salt indicator does not come on.
This option also deactivates the release of rinse

aid but only when the rinse aid dispenser is

deactivated, (rinse aid indicator does not come

on). If the rinse aid dispenser is activated, rinse

aid is released even with the option Multi tab

activated.
With the use of this option the programme

duration is prolonged to increase the cleaning

and drying results with the use of multi-tablets.
Multi tab is not a permanent option and must be

selected at every cycle.

How to activate Multi tab

Press

Option

until the indicator Multi tab comes

on.

Time save

This option increases the pressure and the

temperature of the water. The washing and the

drying phases are shorter.
The total programme duration decreases by

approximately 50%.
The washing results are the same as with the

normal programme duration. The drying results

can decrease.

How to activate Time save

Press

Option

until the indicator Time save comes

on.

If the option is not applicable to the programme,

the related indicator does not come on or it flashes

quickly for a few seconds and then goes off.

The display shows the updated programme

duration.

Sanitize

With this option you have better hygiene

results. During the last rinsing phase, the

temperature stays at 70 °C for at least 10

minutes.

How to activate Sanitize

Press

Option

until the indicator Sanitize comes

on.

If the option is not applicable to the programme,

the related indicator does not come on or it flashes

quickly for a few seconds and then goes off.

The display shows the updated programme

duration.

Dishwasher User Manual

Содержание JLDWS1229





































Результаты поиска

Содержание JLDWS1229

Отзывы:

Похожие инструкции для JLDWS1229

Бренды по названию

Популярные бренды

John Lewis JLDWS1229, Руководство пользователя

Результаты поиска

Содержание JLDWS1229

Отзывы:

Похожие инструкции для JLDWS1229

Бренды по названию

Популярные бренды