background image

Cooker hood user guide

6

Cautions

•  This cooker hood is designed for domestic use only.

•  This cooker hood is designed to be operated by adults. 

Children should not be allowed to tamper with the controls 
or play with the cooker hood.

•  Do not leave frying pans unattended during use, as 

overheated fats and oils may catch 

fi

 re.

•  Do not do 

fl

 ambé cooking under this cooker hood.

•  Do not leave naked 

fl

 ames under the cooker hood.

•  Make sure foreign objects do not get into the cooker hood 

or obstruct the motor.

•  Do not use the cooker hood without 

fi

 lters 

fi

 tted.

•  Clean or replace the 

fi

 lters regularly to avoid oil build up.

•  Do not replace the 

fi

 lters while the cooker hood is 

operating.

• Replacement 

fi

 lters should be bought from authorised 

dealers.

•  The light and cover may be hot in use.

•  Do not use abrasive cleaning materials or scouring pads 

when cleaning the cooker hood.

Electrical information

Mains supply

Should the power supply cable need to be replaced, this 
must be carried out by an approved service engineer. John 
Lewis declines any liability should this safety measure not be 
observed.

Before switching on, make sure the electricity supply voltage is 
the same as that indicated on the cooker hood’s rating plate. 

The cooker hood must be installed by a quali

fi

 ed electrician or 

competent person.

Warning! The appliance should not be 
connected to the electrical supply by means 
of an extension cable.

Earthing Instructions

If the symbol   

is not

 displayed on the cooker hood’s rating 

plate, this is a class I electrical appliance and must be properly 
earthed.

If the symbol   

is

 displayed on the cooker hood’s rating plate, 

this is a class II electrical appliance and therefore no earthing 
cable is required.

In either case, the plug must be easily accessible after the 
installation of the cooker hood.

If the cooker hood is connected directly to the electricity 
supply, a suitably dimensioned omnipolar switch with 3mm 
minimum opening between contacts must be 

fi

 tted between 

the power supply and the cooker hood, and must comply with 
the load and current regulations.

Class I Electrical Appliances

The cooker hood must be connected to the electricity supply 
as follows:

 

Brown = Live

 

Blue = Neutral

 

Yellow/Green = Earth

Class II Electrical Appliances

The cooker hood must be connected to the electricity supply 
as follows:

 

Brown = Live

 

Blue = Neutral

Содержание JLBIHD624



















Отзывы: