Step Three
Step Four
Legs x 2
G.
E.
6.
F.
H.
Nut M8 x 2
Spanner M13 x 1
STEP 2
For Footboard Only
3.5 x 30mm x 2
3.5 x 18mm x 2
M6 x 25mm x 4
1
6
3
Nut M8 (F)
Spanner M13 (H)
Spring
Washer M8 (I)
3.5 x 18mm (J)
6
7
STEP 1
Legs x 2
R
L
7.
Metal plates x 2
I.
6.
Spring
Washer M8x2
2
3
6
7
3.5 x 30mm(G)
M6 x 25mm (E)
A.
J.
M4 Allen Key x 1
M4 (A)
x2
Fo
r H
ead
bo
ar
d
O
n
ly
7
6
STEP 3
R
2
3
6
7
3.5 x 30mm(G)
M6 x 25mm (E)
M4 (A)
L
4/6
Insert the Front Legs (6) into the pre-drilled holes in the underside of the Headboard (1) and twist to
secure, as shown in the diagram below.
Attach Metal Plate (7) and Wooden Leg (6) together as shown in Step 1. Make sure the arrow on the metal plate and
wooden leg line up. Attach together Wooden Leg (6) and Metal Plate (7) using Spring Washer (I) and Nut M8 (F) then
tighten with Spanner M13 (H) and Screw 3.5 x 18mm (J). Next attach the leg to the Footboard (2) and Side Rail (3) as
shown in Step 3, using Bolt M6 x 25mm (E) and Screw 3.5 x 30mm (G). Tighten the bolt with Allen Key M4 (A).
