Place Legs (7) under the Headboard (1), and Footboard (2). Attach the Legs (7) to both Headboard and
Footboard using M6 x 40mm Bolt (J), M6 Spring Washer (G) and M6 Washer (H).
On Footboard
,
hand-tighten to loosely secure parts together. Do not Tighten with the M4 Allen Key until you have inserted
the leg’s Bolt to the side rail in the next step.
(As per diagram below)
Step by step assembly instructions
L.
M8 Spring Washer
x 2
K.
M8 x 45mm Bolt
x 2
Step One
Step Two
3/7
x2
Fig. 2
Fig. 1
x2
1
3
M8x45mm (K)
(L)
LOOSELY SECURE PARTS TOGETHER
IN ORDER FOR CENTRE RAIL
TO FIT IN NEXT STEP
Bracket
Side Rail
1
2
AND
3
Starting with the Headboard (1) attach the Side Rails (3) using the one pre-inserted M8 x 45mm Bolt (K), M8 Spring
Washer (L). Please do not tighten the bolts yet. Now, place Metal Bracket on Side Rails (3) over pre-inserted in the
Footboard (2). Only then can you proceed to insert the M8 x 45mm Bolt (K), M8 Spring Washer (L) in the Other hole
on the Headboard (1). Do not tighten with M5 Allen Key (B) until you have inserted the Centre Rail in the next step.
M6 X 40mm x 6
M6 Spring Washer
x 6
M6 Washer x 6
Legs x 4
H.
G.
J.
7.
DO NOT TIGHTHEN THE BOLT ON
THE FOOTBOARD UNTIL YOU
HAVE INSERTED THE LEG’S BOLT
AT THE SIDE RAIL
M6 x 40mm (J)
M6 Spring Washer
(G)
M6 Washer (H)
(Footboard)
Bolt inserted
on Outer Hole ONLY
x 2
7
7
2
7
7
1
3
1
2
3
(HEADBOARD)
M4 (A)
M6 x 40mm (J)
M6 Spring Washer
(G)
M6 Washer (H)
x 2
Bolt inserted
on Outer Hole
ONLY
NOTE: Ensure the Side Rail (3) which has sticker saying ‘HEAD’ is attached on headboard side.
HEAD
HEAD
