0
The
may be dusted using a dry cloth. To clean, wipe with a barely damp cloth.
The product is maintenance free however we recommend that regular checks are
completed to ensure that no components have been damaged, which could result in
To open and close the blind,
first take the hook out of the
components box and attach
to the tilter which is
already
a
ssembled in
the headrail.
To attach align in direction
and insert the hook into the
hole of the tilter.
Tilter
Hook
T
hen attach the control wand
to the hook. Turn the control
wand to angle the slats.
To raise or lower the blind,
simply lift or gently pull on the
bottom bar to place in your
desired position.
8
General Purpose wall plug
Generally aerated blocks should not be used to support
heavy loads, use a specialist fitting in this case. For light
loads, general – purpose wall plugs can be used.
Plasterboard wall plug
For use when attaching light loads on to plasterboard
partitions.
Cavity Fixing wall plug
For use with plasterboard partitions or hollow
wooden
doors.
Cavity Fixing – Heavy Duty wall plug
For use when fitting or supporting heavy loads
such as shelving, wall cabinets and coat racks.
Hammer Fixing wall plug
For use with walls stuck with plasterboard. The hammer
fixing allows it to be fixed to the wall rather than the
plasterboard. Always check the fixing is secure to the
retaining wall.
Shield Anchor wall plug – Heavy loads
For use with heavier loads such as TV and Hi-Fi
speakers and satellite dishes etc.
FIXINGS
You can use one of the following types of wall plug if your walls are made of brick,
breezeblock, concrete, stone or wood.
Warning:
installer.
Please note that the screws provided with this product are suitable for a
solid brick wall.
Important
- When drilling into the walls always check that there are no
hidden wires or pipes etc.
Take care when drilling on glazed tile surfaces in case the drill slips.
!
