Step Four
Step Five
Step Six
Step Seven
Approx.
10cm
d1+d2+d1=Pole Length
d1
Approx.
10cm
d1
d2 (distance between end brackets)
=
=
1. Calculate the length of the pole.
2. Mask the area to be cut to avoid
damaging pole.
3. When using two poles cut equal
lengths from each pole.
4. File sharp edges to avoid injury or
damage to other components.
1. Join poles if required by sliding a joining piece
into the uncut end of a pole.
2. Slide the second pole onto the joining piece
taking care to push equal lengths of the joiner into
each pole.
3. Always join the uncut ends of the pole.
4. Pole joints should always be at the half way point
of the total length and supported with a bracket.
Eyelet & Tab Top Curtains
1. Slide the curtain onto the pole before fitting the pole to the brackets.
2. Leave the last eyelet or loop hanging from the end of the pole.
3. When using a centre bracket a curtain will need to be hung from each end of the pole.
1. Remove the pole retainer
2. Place pole in bracket.
3. Re-insert the pole retainer till the pole is gripped firmly.
