Step 3
Put 8x cam heads ( A ) into the holes as shown. Insert the 4x wooden dowels ( C ) into the holes
by using a soft hammer as shown.
Step 4
Attach the wooden rail support (L) to the top panel ( 1 ) by using 1x screw ( F ) as shown. Note that
the screw must be screwed from the top surface of the panel where there is a countersink on the hole .
A
2
Step 5
Put 2x cam heads ( A ) to the bottom rail ( 8 ) as shown. Insert the 2x wooden dowels ( C ) into
the holes by using a soft hammer as shown.
3
C
C
A
A
A
A
A
1
L
F
A
A
C
C
Page 4 of 12
