4
28655-1
Step Three
1.
Take the desk (6) and lay it on the clean and flat surface with the predriling holes uppermost.
2.
Locate the left and right support rail (3, 4) onto the desk (6) as shown in the picture.
3.
Insert the four screws (G) into the holes provided.
4.
Tighten the four screws (G) using the crosshead screwdriver.
Step Four
1.
Locate the back panel (5) onto the desk (6) as shovn in the picture. Be sure that holes of wall
fixing are at the side where are support rails.
2.
Insert three screws (A) into the holes provided.
3.
Tighten the three screws (A) using the allen key (H).
6
6
3
4
G
G
G
G
Gx4
213 mm
A
Ax3
A
A
5
Hx1
4
213 mm
4
3
!!!
