Assembly
Refer to assembly drawing opposite. Carefully unpack the carton, making sure all the parts are
present before assembly. Gently pull away any protectors from the ends of the tubes. The fitting has
been packaged as five separate parts to prevent damage during transit; please ensure all packaging
has been removed
Step 1
Screw top assembly (4) on to tube (3), then screw on tube (2) and (1).
Take care not to trap the cable or cross the thread, firmly tighten the tube by hand.
Check all joints are tight.
Step 2
Pull any excess cable through from the underside of the base. Turn completed assembly
anticlockwise approximately 6 times (Turning the tube anticlockwise first, ensures that the cable
will straighten when tubes are fully assembled). Screw assembly in a clockwise direction on to the
base. Take care not to trap the cable or cross the thread, firmly tighten the tube by hand.
Step 3
Gently pull the remaining slack cable through from the underside of the base. Tighten cable cord
screw (X).
Step 5
Fit the bulb as per the instructions overleaf.
Do not exceed the wattage as recommended as this may cause damage to the light fitting.
Step 6
Your standard lamp is now ready to use. Switch on using the floor switch.
Thank you for purchasing this Brandon floor light. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage
the finish.
Warnings!
This is a Class 1I product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
For your safety, always switch off the supply before cleaning or adjusting.
If you are in any doubt, please consult a qualified electrician.
Parts list
Image
Qty
Light fitting
1
