Fittings and parts checklist
A Allen Key (4mm)
x 1
E
Screws (M6X85)
x 2
B Allen Key (5mm)
x 1
F
Glass with
aluminium disc x
1
C Screws (M6X15)
x 8
G
Cross bar x 2
D Screws (M8X25)
x 8
H
Legs x 2
Step by step assembly instructions
Note: Please do not fully tighten all screws until you finish assembling all
parts, then go back and fully tighten all screws, this will make it easier
during assembly of unit.
Step One
Put the cross bars (G) between two legs (H) and align the screw holes. Use Allen Key (A)
to tighten all the screws (C) first.
2
