M4
M6x25mm
Step Three
Lower the Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2).
Push down fully and secure in place using M6 x 25mm Bolt (E) and tighten with Allen Key M4 (A). You can
now tighten the bolts at the Side Rails from previous step (Step Two) so all fastenings are now tightened.
Step Four
Starting at the Headboard (1), attach the Centre Plastic Holders (C) into the holes along the Centre Rail (5).
Ensuring the Wooden Slats (4) have the curved side facing up, place the Side Cap (D) onto one end of the
Wooden Slat (4). Insert the other end of the Wooden Slat (4) into the Centre Plastic Holder (C), then insert
the Side Cap (D) onto the Side Rail (3) into the pre-drilled holes.
Side Plastic Cap (30 pcs)
Centre Plastic Clip (15 pcs)
Bent Slat (30 pcs)
Centre Rail
ST
EP
1
M4
M6 x 25mm (E)
ST
EP
2
4.
C.
D.
5
E.
A.
4/6
C
D
4
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE
RAILS (FROM STEP TWO)
