background image

Care and Maintenance

Safety Instructions

Metal Furniture

A slightly damp cloth is the best cleaning agent for your Fran Botanist bedstead.

Do not use any abrasive cleaner or harsh detergent as this can damage the surface.

General warnings:

Never drag furniture when moving it. Always lift it.

Periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage 

or injury.

Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent 

adult.

No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

During assembly children should be kept away from the product due to possible risk of injury.

Do not use this item if any components are missing or damaged.

Warning:

 Not suitable for children under 4 years old.

Warning:

 Do not place this child’s bed near heat sources, windows and other furniture.

Warning: 

Do not use this child’s bed if any part is broken, torn or missing.

Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be

placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords and

should be placed either tight to any wall or have a gap of 300mm between the wall and the side of the

bed.

This product complies with BS 8509:2008 + A1:2011.

 

If you require any additional information or have any issues with this product please call the

John Lewis Helpline on 01244 689949 or email [email protected].

This bed is for use with a standard single size mattress L190 x W90 x H18.

John Lewis Partnership  171 Victoria Street  London  SW1E 5NN

www.johnlewis.com

5/5

Содержание 803/40901






Отзывы: