Page 4 — 462W & 464W
FIG. 3
3)
Spread glue in the holes in the Front Leg Assembly and attach to the side aprons and side
stretchers. Tap firmly in place.
DO NOT LAY THE CHAIR ON ITS BACK WHEN TAPPING THE
FRONT LEG ASSEMBLY IN PLACE AS YOU MAY DAMAGE THE BACK.
Quickly remove any glue
that may drip out of the holes.
4)
Before attaching corner blocks, verify that the side aprons are seated snugly against the front and
back legs. Spread a light layer of glue in the upper and lower notches of a Back Corner Block (GG)
and insert in the grooves in the back and side aprons. Fasten in place with four #8x1" Pan Head
Screws (MM) through the predrilled holes. Repeat with the other back corner block. See FIGURE 4.
Spread a light layer of glue in both notches in a Front Corner Block (HH) and insert in the grooves
in the side and front aprons. Fasten in place with #8x1" Pan Head Screws (MM). Repeat for the other
front corner block. See FIGURE 4A.
Glue a 3/8" Wood Button (Q) into the hole in the side of each front leg.
FIG. 4
GG
Corner Block
MM
Corner Block
GG & HH
MM
HH
FIG. 4A
HH
Q
Содержание Create Achair Bordeaux 462W
Страница 6: ...Page 6 462W 464W...
