PAGE 2 — 133AC, 134AC, 135AC & 159AC
133AC, 134AC, 135AC & 159AC — Parts List
Before beginning assembly,
check that the quantities of the parts received match those on the parts list below.
1)
Cover the work surface with a cloth or piece of cardboard to protect the seat and arms. Place
the Seat Assembly (A) upside down on the work surface. Be sure that the front of the swivel
(marked on top side of swivel) is placed towards the front of the seat and place the Leg
Assembly (B) upside down on the bottom of the seat and line up the holes in the swivel with
the pilot holes in the seat. Screw the swivel into place through the access holes in the disc
with two #14 x 3/4" Pan Head Screws (C). Turn the leg assembly until the other two sets of
holes line up with the access holes in the disc and finish screwing the swivel down with the
remaining #14 x 3/4" Pan Head Screws (C). See FIGURE 1.
FIG. 1
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
Phillips Head Screwdriver
IMPORTANT:
Not intended for use by
children without adult
supervision.
133AC Kingston Barstool shown
Quantity
Part Description
133AC 134AC 135AC 159AC
A
Seat Assembly . . . . . . . . . . . . . . 1 . . . . . . .1 . . . . . . 1 . . . . . . 1
B
Leg Assembly . . . . . . . . . . . . . . . 1 . . . . . . .1 . . . . . . 1 . . . . . . 1
C
#14 x 3/4" Pan Head Screws . . . 4 . . . . . . .4 . . . . . . 4 . . . . . . 4
A
B
C
x4
FRONT
