John Adams Cutie Stix, Инструкция по эксплуатации

Страница: 9 / 12

6-1
6-2
6-3
6-1 Insert one end of THREAD through a JEWELLERY CLASP (large end out).
6-2 Tie a double knot or triple knot.
6-3 Pull THREAD into CLASP.
THREADING UNIT
FOR MAKING BRACELETS & NECKLACES
Select THREAD from long end.
Use safety scissors (not included). Adult supervision recommended.
Cut THREAD to MINIMUM recommended length.
BRACELET: 7”
NECKLACE: 16”
Rotate the THREADER TUBE up to a 30° angle.
Replace loose end of THREAD into SPOOL slot.
Arrange cut Medium & Large pieces onto THREADER TUBE in the order of
your intended design.
4 5
6 7
Push the NON-Clasp end of THREAD through the THREADER TUBE.
TIP: Use different JEWELLERY CLASPS at each
end of your THREAD, or they will not clip together.
1 2
3
9