7
CLUSTER PROGRAMMING
Setting clusters / UHF input
The amplifier has 2 UHF inputs which are splitted over 5 clusters.
There are three possible configurations :
Input
UHF1
UHF2
Number of
Cluster(s)
5
0
UHF1 clusters are indicated by the RED LED’s n° 1,2,3,4 and 5.
4
1
UHF2 clusters are indicated by the GREEN LED’s n° 4 and 5.
3
2
To set the number of cluster(s) per input:
>
Turn the button to select
Split UHF
mode.
The LED is green.
>
Push the button to confirm.
The LED is red.
>
Turn the button to set one configuration:
UHF2 cluster indicator
Display of selected configuration:
UHF1 cluster indicator
>
Push the button to confirm.
The
LED
is
green.
Note:
Each non used cluster has to be switched off (Park function).
Set the cluster to channel “00” (see following paragraph “Setting channels / cluster”).
Split UHF
Split UHF
Input
Display UHF1 UHF2
Number of
Cluster(s)
“5.0”
5
0
“4.1”
4
1
“3.2”
3
2
Split UHF