Johannus symphonica 450, Руководство пользователя

Страница: 15 / 44

User Manual Symphonica 450 15
Transposer (TRANS.)
The Transposer function shifts the pitch by half-tone
increments (from -8 to +8). The transposer setting
can be read on the display (
Trans: …
).
1. Press the TRANS-piston.
2. Use the - and + pistons to set the pitch.
3. When the Transposer change needs to be saved, press the SET piston while
the TRANS. piston is lit.
Crescendo (CR):
Crescendo is a function to activate and de-activate the Crescendo Pedal. See
§4.12 Crescendo Pedal.
Recall / Cancel function (0):
The 0-piston cancels stops in two ways:
1. A short press on the 0-piston: Only the last change is cancelled.
2. A long press on the 0-piston: All stops are cancelled.
4.9 Pre-programmed memory locations
Pre-programmed memory locations are available by operating pistons PP to T.
These six memory locations have factory settings (presets) appropriate for the
quiet pianissimo to the loud tutti.
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T). The active stops light up.
Programming a pre-programmed memory location:
1. Select the desired stops.
2. Press the SET piston. Hold the piston.
3. Press the desired pre-programmed memory location (PP-T).
4. Release the SET piston.
It is advisable not to use the Cantus Firmus in combination with the coupler
SWELL - GREAT because this overrules the solo function of the Cantus Firmus.
The current setting of the pre-programmed memory location will be lost.
Although it is possible to store any registration under a piston of a pre-
programmed memory location it is advisable to select a registration matching the
text of the piston.