14
Programming a fixed memory location
1. Select the desired stops.
2. Push in the SET button. Hold in the button.
3. Push in the desired fixed memory location button (P through FF).
4. Release the fixed memory location button (P through FF).
5. Release the SET button.
Restoring the factory settings
1. Switch off the organ.
2. Push in the FF and M1 buttons. Hold in the buttons.
3. Switch on the organ.
4. Wait until the lights in the 0 button and SET button are lit.
5. Release the FF and M1 buttons.
4.7.2 Capture memory location
Calling up a capture memory location
1. Push in the desired capture memory bank (M1 through M3).
2. Press the desired memory location (P through FF). The active stops light
up.
Programming a capture memory location
1. Select the desired stops.
2. Press the desired capture memory bank (M1 through M3).
3. Push in the SET button. Hold in the button.
4. Push in the desired memory location (P through FF).
5. Release the memory location button (P through FF).
6. Release the SET button.
The current setting of the fixed memory location will be lost.
The settings you have made in the fixed memory locations will be
lost.
The current setting of the capture memory location will be lost.
Handleiding_Studio_Final01.fm Page 14 Tuesday, April 19, 2005 10:14 AM
