JOHANNUS LiVE III
Quick Reference Guide
OVERVIEW OF CONTROLS
SWITCH ON
Switch on the organ with the on/off piston at the right, underneath the manuals. Wait several seconds.
The lights of the HR-piston and the as standard set functions light up. The settings appear on the display.
ACCESSORIES
Reeds Off (RO)
:
Reeds Off is a function to switch off all reeds simultaneously.
Sequence - and + (SEQ- and SEQ+):
Sequence is a function to call up capture memory locations in a sequential way.
All Swells to Swell (S/S):
All Swells to Swell transforms the swell pedal for Manual III to a swell pedal for the whole organ.
If no expression pedal is configured as a swell pedal for Manual III, the S/S piston cannot be activated.
Hand Registration (HR):
Only when the HR-piston is activated you will be able to register manually. If you are unable to hear an organ
sound, after you have pulled a draw stop and pressed a key, please check if the HR-piston is activated.
Hand Regist (HR+):
Only when the HR+ piston is activated, you can join your own registration to the fixed-, as well as to the capture
memory combinations.
Crescendo (CR)
:
Crescendo is a piston to activate the crescendo pedal.
If no expression pedal is configured as a crescendo pedal, the CR-piston cannot be activated.
Manual Bass (MB)
:
Couples the Pedal monophonic to Manual II. Only the lowest key that is played on Manual II is coupled from the
Pedal to Manual II.
Cantus Firmus (CF)
:
Couples Manual III monophonic to Manual II. Only the highest key that is played on Manual II is coupled from
Manual III to Manual II.
Transposer (TRANS.):
The Transposer function shifts the pitch by half-tone increments (from -8 to +8). The set pitch can be read on the
display (Trans:..).
- Press the TRANS. piston.
- Use the - and + pistons to set the pitch.
Reset function (0):
Pressing the 0-piston cancels all registrations.
JOHANNUS MENU (MENU):
In the Johannus Menu several functions of the organ can be set:
-
Press the MENU piston to activate the Johannus Menu on the display.
-
Navigate the menu with the - and + pistons.
-
Confirm a choice with the ENTER-piston.
-
Cancel or step back in the menu with the MENU-piston.
A
Sample banks
P
ENTER
B
Tremulants
Q
MENU
C
Couplers
R
0: Reset
D
Display
S
Manual I
E
Headphone connection
T
Manual II
F
SET
U
Manual III
G
Capture memory locations
V
USB port
H
HR: Hand Registration
W
On/Off piston
I
HR+: Hand Regist
X
Pre-programmed memory locations
J
CR: Crescendo
Y
RO: Reeds Off
K
MB: Manual Bass
Z
Listening Positions
L
CF: Cantus Firmus
AA
MIDI registers
M
VOL.: General Volume
AB
S/S: All Swells to Swell
N
TRANS.: Transposer
AC
SEQ- and SEQ+ pistons
O
- and + pistons
