background image

Hoyer

®

HPL700 and HPL 700WSC

22

English

11. Specifications

Safe Working Load ................................................................................. 700 lbs  .................... 227kg
Maximum Overall Length.............................................................................. 56"  ................ 1423mm
Minimum Overall Length............................................................................... 55"  ................ 1397mm
Maximum Overall Height .............................................................................. 81"  ................ 2058mm
Minimum Overall Height .......................................................................... 57.75"  ................ 1467mm
Height at Maximum Reach ........................................................................ 46.5"  ................ 1181mm
Reach at Maximum Height ........................................................................ 28.5"  .................. 724mm
Reach at Minimum Height ............................................................................ 27"  .................. 686mm

Maximum Reach*

 .................................................................................... 37.75"  .................. 959mm

Turning Radius ............................................................................................. 62"  ................ 1575mm
Legs Open - External Width .................................................................... 46.25"  ................ 1175mm
Legs Open - Internal Width...................................................................... 42.25"  ................ 1073mm
Legs Closed - External Width .................................................................... 27.5"  .................. 699mm
Legs Closed - Internal Width ..................................................................... 23.5"  .................. 597mm
Overall Height of Legs ................................................................................. 4.5"  .................. 114mm
Ground Clearance ................................................................................... 0.625"  .................... 16mm

Front Twin Casters

 ......................................................................................... 3"  .................... 76mm

Rear Braked Casters ...................................................................................... 4"  .................. 102mm
Maximum Sound Level ........................................................................................................

64 dB (A)

Operating forces of the controls meet the requirements of ISO 10535

*Reach = Center of spreader bar to the front of the mast

6-Point Spreader Bar (measurement to top of location pins)

Cradle Maximum Height ................................................................................69"  ................ 1753mm
Cradle Minimum Height ............................................................................23.25" ..................  591mm

Weight

Mast, Base, Boom Assembly, Cradle  ................................................. 143.4 lbs  ...................... 65kg

Power Pack

 ............................................................................................. 6.6 lbs ......................... 3kg

Total ........................................................................................................ 150 lbs  ...................... 68kg
Base Assembly  ........................................................................................ 83 lbs  ...................... 38kg

Mast and Boom (not including battery)

 .................................................. 40.4 lbs  ...................... 18kg

6-Point Spreader Bar ................................................................................ 20 lbs  ........................ 9kg

All measurements are within a +5/-5% tolerance.

Содержание Hoyer HPL700

























Отзывы: