Joemeek SC2 Скачать руководство пользователя страница 10

 

HINTS 

 

TIPS ON USE. 

 
Some handy hints from some world class users: 
 
VOICES. The compressor adds stability and depth to solo voices, it allows you 
to use less of the 'enhancer' and still retain the sparkle. Over compression 
with fast attack times on voice will change the apparent tonal quality so listen 
carefully! 
Try recording first with a little compression, then adding more at a different 
release time on the mix. 
PIANO. Tricky, use it very gently unless you want unusual effects! 
PERCUSSION. The danger is to use it too much too early, save heavy use for 
the mix. 
GUITARS. Wind it on! The depth and sustain make it a must.  
ORCHESTRAL. A little light 'tightening' of an orchestral sound will make it 
more present and warmer sounding and add body to string sounds. 
ON THE MIX. Remember that big compressed sounds are a balancing act; if 
any instrument or sound in the mix is suddenly louder than others, it will kick 
down the level of all the rest. As the sound stays bright and 'present' with this 
compressor, it's possible to go much heavier; but the initial balance gets more 
critical! Experiment with the attack control. 
GROUP RECORDING. Try compressing the backing but leave the bass 
outside the compression and compress it separately. 
GENERALLY, because the compressor is so extremely quiet and free of any 
nasty distortions, its quite OK to use it both on individual tracks, and on the 
mix, so I tend to use it individually on almost everything just to gain some 
individual warmth, then use it again on sub groups in the mix; so it pays to 
have more than one! 
 
Thanks for buying the compressor: I'm now enjoying hearing its characteristic 
sound on records and productions from all over the world.  
 
 
 
 
 
 
 
Page 9 

 

Содержание SC2












Отзывы: