JoeCo Cello, Руководство пользователя

Страница: 9 / 26

CELLO - User Manual v1.0 Page | 9
Operating modes
There are 4 modes of operation of the Cello:

All channels at up to 48kHz sampling

16 channels at up to 96kHz sampling

8 channels at up to 192kHz sampling

4 channels at up to 384kHz sampling
All modes support the lower sample rates available in the higher channel count
settings. Select the operating mode using the blue button at the bottom left of the
Mic/Line Input Controls section. The JoeCoControl (JCC) interface will change its
width to indicate which channels are available in the selected mode.
JoeCoControl interface
When you first run the JoeCoControl interface you will see a panel like this. This view
is useful as it contains all the pertinent controls in a small interface that can co-exist
on screen alongside your DAW interface.
The first (left hand) section is the input controls and master settings panel.
The next section is the low latency mix section which controls the very low latency
mix for headphone foldback or if you’re monitoring through speakers in the control
room.
The final area on the right is the monitoring section.
The orange upward pointing triangular button at the top left of each panel section
brings up an expanded view of that section. When a panel is expanded, the triangular
button becomes downward pointing and pressing it again will minimise the panel
again.