SWITCH
THERMOSTAT
•
Heating at reduced power: turn the knob to setting I(800W).
•
Heating at full power: turn to setting II (1500W).
•
Switching off: turn the knob to setting.
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the right thermostat knob(where
included) in an anti-clockwise direction up to the point where the appliance switches off and not
beyond. The temperature fixed in this way will be automatically regulated and kept at a constant
level by the thermostat.
CLEANING AND MAINTENANCE
Before cleaning always remove the plug from the electrical socket.
Clean the air inlet/ outlet grilles frequently.
Never use abrasive powders or solvents.
WARNINGS
•
Do not use the appliance in the vicinity of showers, bath tubs, wash basins, swimming pools,
etc.
•
Always use the heater in an upright position.
•
Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles(danger
of overheating).
•
The heater must be positioned at least 50 cm from furniture or other objects.
•
When the appliance is used in portable version, do not place it up against walls, furniture,
furniture, curtains, etc .
•
The appliance must be installed so that the switches and other controls can not be reached
by persons using the bath tub or the shower.
•
This appliance comes with a Y-type connection. Replacement of the feed cable must be
entrusted only a technician authorized by the manufacturer, because such work requires
special tools.
•
The appliance must not be positioned directly underneath a fixed power point.
•
Do not use the appliance while it is functioning in order to avoid overheating with the
attendant risk of fire.
•
Do not use the appliance in rooms less than 4m
2
area.
-9-
