6
OPERATION
1. Make sure the amplifier or receiver power is OFF
and set the volume to minimum.
2. Set the volume on the volume control to maximum
(fully clockwise).
3. If you are using a JobSite speaker-selection
system, locate the ON/OFF button that
corresponds to the speaker pair you wish to play.
Set it to the ON position. Make sure the
defeatable protection circuit is not enabled. See
Using Speaker Selectors with IM Volume
Controls,
on page 4
.
4. Turn ON the amplifier or receiver and select a
source, such as the Tuner or CD player.
5. Slowly turn up the amplifier or receiver volume
and set it to a comfortable – not maximum –
listening level. Don’t overdrive or "clip" your
amplifier. If the sound becomes muddy or
distorted, you have reached the limit of your
amplifier’s volume capability. Reduce the volume
at once to avoid damaging your speakers.
6. Use the volume control to adjust the volume of
the speakers to the desired listening level. If all
the speaker pairs in your system are equipped
with JobSite volume controls, you can set the
amplifier or receiver volume at one position and
use the JobSite controls exclusively.
7. To turn OFF the speakers, turn the knob on the
volume control fully counter-clockwise, or press
the ON/OFF button on your speaker selector.
DS00376BCN_V12.qxp 2/17/05 3:41 PM Page 6
