3
3. Feed the opposite end of the nylon
security cable through the exposed
portion of the cable that was just fed
through the security eyelet, as shown in
Figures 3 and 4
.
4. Pull the ends of the security cable with
the loops as tight as you can until the
knot around the security eyelet is
tightened as shown in
Figure 5
.
5. Feed the Security Stake through the loops
at the end of the security cable and insure
that they are inserted into the cable holder
provided at the top of the stake, as shown
in
Figure 6
.
6. Pick a spot in the ground which the
loudspeaker will cover and drive the
security stake all the way into the ground
until the cable holder is completely under
the surface of the ground, as shown in
Figure 7
.
Pull on the security cable and verify that the
stake is securely held in the ground.
Figure 2
Security Cable in Eyelet
Figure 3
Security Cable
Looping Through
Figure 4
Security Cable after Looping
Figure 5
Security Cable
Connected and Tightened
Figure 6
Security Stake
Attachment to Cable
Figure 7
Security Stake
Driven into Ground
DS00377BCN_LSR-5_6.qxp 11/19/04 2:26 PM Page 3
