JOBO JOBOBIKE Bruno Скачать руководство пользователя страница 40

Страница: 40 / 48

Error with wheel speed detecting sensor

1. Restart the system

2. Check that the magnet attached to the spoke is aligned with the speed sensor
and that the distance is between 10 mm and 20 mm.

3. Check that the speed sensor connector is connect edcorrectly.
4. Connect the pedelec to BESST, to see if there is a signal from the speed sensor.

5. Using the BESST Tool- update the controller to see if it resolves the problem.
6. Change the speed sensor to see if this eliminates the problem. If the problem still

occurs, please change the controller or contact your supplier.

Torque signal Error

1. Check that all connections are connected correctly.

2. Please connect the pedelec to the BESST system to see if torque can be read by
the BESST tool.

3. Use the BESST Tool to update the controller to see if it resolves the problem, if
not, please change the torque sensor or contact your supplier.

Speed signal of the torque sensor has an error

1. Check that all connections are connected correctly.
2. Please connect the pedelec to the BESST system to see if speed signal can be

read by the BESST tool.
3. Change the Display to see if the problem is solved.

4. Use the BESST Tool to update the controller to see if it resolves the problem, if
not, please change the torque sensor or contact your supplier.

Overcurrent from controller

Use the BESST tool to update the controller. If the problem still occurs, please
change the controller or contact your supplier.

Содержание JOBOBIKE Bruno

















































Результаты поиска

Содержание JOBOBIKE Bruno

Отзывы:

Бренды по названию

Популярные бренды

JOBO JOBOBIKE Bruno, Руководство пользователя

Результаты поиска

Содержание JOBOBIKE Bruno

Отзывы:

Бренды по названию

Популярные бренды